Menu Close

Rescuing 5.25″ Floppy Disks from Oblivion

This post is a careful log of how I rescued data trapped on 5 1/4″ floppy disks, some dating back to 1984 (including those pictured here). While I have tried to make this detailed enough to help anyone who needs to try this, you will likely have more success if you are comfortable installing and configuring hardware and software.

I will break this down into a number of phases:

  • Phase 1: Hardware
  • Phase 2: Pull the data off the disk
  • Phase 3: Extract the files from the disk image
  • Phase 4: Migrate or Emulate

Phase 1: Hardware

Before you do anything else, you actually need a 5.25″ floppy drive of some kind connected to your computer.  I was lucky – a friend had a floppy drive for us to work with. If you aren’t that lucky, you can generally find them on eBay for around $25 (sometimes less). A friend had been helping me by trying to connect the drive to my existing PC – but we could never get the communications working properly. Finally I found Device Side Data’s 5.25″ Floppy Drive Controller which they sell online for $55. What you are purchasing will connect your 5.25 Floppy Drive to a USB 2.0 or USB 1.1 port. It comes with drivers for connection to Windows, Mac and Linux systems.

If you don’t want to mess around with installing the disk drive into our computer, you can also purchase an external drive enclosure and a tabletop power supply. Remember, you still need the USB controller too.

Update: I just found a fantastic step-by-step guide to the hardware installation of Device Side’s drive controller from the Maryland Institute for Technology in the Humanities (MITH), including tons of photographs, which should help you get the hardware install portion done right.

Phase 2: Pull the data off the disk

The next step, once you have everything installed, is to extract the bits (all those ones and zeroes) off those floppies. I found that creating a new folder for each disk I was extracting made things easier. In each folder I store the disk image, a copy of the extracted original files and a folder named ‘converted’ in which to store migrated versions of the files.

Device Side provides software they call ‘Disk Image and Browse’. You can see an assortment of screenshots of this software on their website, but this is what I see after putting a floppy in my drive and launching USB Floppy -> Disk Image and Browse:

You will need to select the ‘Disk Type’ and indicate the destination in which to create your disk image. Make sure you create the destination directory before you click on the ‘Capture Disk File Image’ button. This is what it may look like in progress:

Fair warning that this won’t always work. At least the developers of the software that comes with Device Side Data’s controller had a sense of humor. This is what I saw when one of my disk reads didn’t work 100%:

If you are pressed for time and have many disks to work your way through, you can stop here and repeat this step for all the disks you have on hand.

Phase 3: Extract the files from the disk image

Now that you have a disk image of your floppy, how do you interact with it? For this step I used a free tool called Virtual Floppy Drive. After I got this installed properly, when my disk image appeared, it was tied to this program. Double clicking on the Floppy Image icon opens the floppy in a view like the one shown below:

It looks like any other removable disk drive. Now you can copy any or all of the files to anywhere you like.

Phase 4: Migrate or Emulate

The last step is finding a way to open your files. Your choice for this phase will depend on the file formats of the files you have rescued. My files were almost all WordStar word processing documents. I found a list of tools for converting WordStar files to other formats.

The best one I found was HABit version 3.

It converts Wordstar files into text or html and even keeps the spacing reasonably well if you choose that option. If you are interested in the content more than the layout, then not retaining spacing will be the better choice because it will not put artificial spaces in the middle of sentences to preserve indentation. In a perfect world I think I would capture it both with layout and without.

Summary

So my rhythm of working with the floppies after I had all the hardware and software installed was as follows:

  • create a new folder for each disk, with an empty ‘converted’ folder within it
  • insert floppy into the drive
  • run DeviceSide’s Disk Image and Browse software (found on my PC running Windows under Start -> Programs -> USB Flopy)
  • paste the full path of the destination folder
  • name the disk image
  • click ‘Capture Disk Image’
  • double click on the disk image and view the files via vfd (virtual floppy drive)
  • copy all files into the folder for that disk
  • convert files to a stable format (I was going from WordStar to ASCII text) and save the files in the ‘converted’ folder

These are the detailed instructions I tried to find when I started my own data rescue project. I hope this helps you rescue files currently trapped on 5 1/4″ floppies. Please let me know if you have any questions about what I have posted here.

Update: Another great source of information is Archive Team’s wiki page on Rescuing Floppy Disks.

Posted in at risk records, electronic records, future-proofing, learning technology, preservation, software

19 Comments

  1. Pingback:Floppy disk article on Spellbound a must read | Laura DeMuro

  2. Pingback:“When Data Disappears”: My NYT Op-Ed - Kari Kraus

  3. bhl

    Hi I am wondering if you use any jumper or not for your floppy drive by using FC5025? I bought this one but it didn’t work. Please advise,thank you very much!

  4. Jeanne

    As far as I understand (recall, I had some help from a hardware savvy friend) the FC5025 floppy controller plugs into a 5.25″ floppy drive. It also has a USB cable to connect to your computer. You need to find a way to get power to your floppy drive (the instructions suggests connecting to your computer’s power supply). The other option is to try their ‘disk drive external enclosure’ which will give you a way to power your drive from an external power source. With this solution you still need to by the FC5025 controller as well. Good luck!!!

  5. Jeanne

    Great question. I’m not sure. Most of the disks I have extracted data from have reported issues reading some sectors. I already know that I am getting errors – so my focus was more on spotting the scale of the issues with each file. I suspect that you could compare the size of the files as reported in the directory of the disk to the sizes you had post copy – but I don’t know enough about how the floppies store this information to be sure this is useful. Did the disks keep the size recorded or did they calculate it when a list of files was requested? Going to need to dig a bit deeper to find the answer.

  6. amyc

    I’ve gotten to the point where everything is connected and the disk started extracting, but then got hung up at 50%. Had to force quit. On relaunching the program I changed the disk type and now it always reads “unable to recalibrate drive”. Any thoughts? Thanks!

  7. Jeanne

    @amyc: I don’t have any easy answer for you. It is possible that the disk is corrupted past that point. Did the first 50% actually extract? Or did it just stop in the middle and never retrieve any content?

    Do you have any other disks to test with? I would set it back to the first disk type and try another disk to see if it is your setup vs a damaged disk. Good luck!

  8. Steve

    Just wondering… If I have an internal 3.5″ floppy drive can I convert my 5.25″ floppies to this format? Just copying from one drive to the other, I mean. Thanks.

  9. Jeanne

    @Steve: That is a great question. I think that you would have to capture the disk image to a local hard drive first – and then you can copy them anywhere you like.

    That said – I would point out that 3.5″ floppies aren’t the best ‘holding media’ for your files either. None of these magnetic media can be trusted to sit on your shelf for years and not start to deteriorate.

  10. Leon Baradat

    FWIW, I still have an old computer stuck in a corner with a 5¼” floppy drive. If you still have data on some of these old disks, I can fire it up and get it off for you (assuming the hardware hasn’t died in the meantime)–shoot me an email at lordpeyre@yahoo.com.

  11. Marvin

    Hi:

    Do you have a copy of the document referred to @
    “http://mith.umd.edu/vintage-computers/fc5025-operation-instructions”

    For some unknown reason MITH is no longer acknowledging this documents existence.

    Tnanx
    ;r

  12. Rod

    Jeanne noted in #6 (above) she had sector issues. This might be solvable with a copy of Steve Gibson’s Spinrite (grc.com). Also, if you are comfortable with a hex editor, you might be able to change bungled bits to some useful value. Just a thought.

    Great article. Thanks.

  13. Nancy

    I have the same problem which need to convert data from 5.25 floppy into USB.

    I want to buy a 5.25 floppy drive. I looked at eBay but not sure if it is the right one I need to buy. Does someone want to sell their 5.25 floppy drive which they are no longer need it.

    Thank you in advance. Please contact me via jianyand@rogers.com

    Nasa

  14. wALTER cORRAR

    Instead of me buying the equipment; I could send you the 5.25 and you could convert it to a pocket drive for a fee. Yes, no
    Thank you

  15. Bro95758

    This site does 5.25 file transfers to a thumb drive:

    http://www.floppydisk.com/transfer.htm for a fee $4.95 per floppy.

    Haven’t tried them yet, but given the issues I’ve seen above may be worth a try. PS – I’d think you need to recall in which software you wrote the data – as Jeanne points out – Wordstar, etc. Lastly, if you pass-worded your files – not sure any method except the original computer type you used would work to unlock. Might, but just don’t know yet.

Comments are closed.